Cargo Drawer Handle for Touring and Camping Setups
Custom colours Rated to 250kg
Commercial grade 550 paracord. Nylon outer sheath that holds up to sun, dust and mud.
Made to your length. Bolts into your factory grab handle mounts.
Washers to match. Pick your washer colour for $5 a grip.
Made to order. Braided and posted within 4 days.
GST included. Shipping starts at $10.95 standard.
Earn up to A$15 store credit โ
Receive store credit to use on your next order.
Only eligible purchases made from 3 October 2026 (Brisbane time) count. Earlier purchases are excluded.
Eligible total spend: A$80 earns A$6, A$130 earns A$10, A$190 earns A$15.
Each milestone rewards you once. If one order crosses several milestones, the highest eligible reward applies.
Gift card purchases do not earn store credit rewards and do not count towards reward milestones.
View your rewards โCargo Drawer Handle for Touring and Camping Setups - is made to order and will be dispatched in 1 to 4 business days.
Want only 2 or 3 colours? Pick the same colour in more than one spot.
Optional add-ons
$10.00
$10.00
$5.00
WHY YOU WILL LOVE KRAWLERGRIPS
WHY YOU WILL LOVE KRAWLERGRIPS
- Adds comfort and confidence on and off road
- Durable, UV & abrasion resistant 550 paracord
- Custom lengths & hundreds of colour combos
- Handmade in Australia by a fellow 4WD owner
- Built to handle Aussie conditions
SPECIFICATIONS
SPECIFICATIONS
- Material Genuine Type III 550 nylon paracord
- Braiding Hand braided (Cobra weave)
- Diameter Approx. 32 - 35mm
- Length Custom lengths available
VEHICLE FITMENT
VEHICLE FITMENT
Suitable for most vehicles with screw-mounted grab handles including
- Nissan Patrol
- ๏ปฟ๏ปฟToyota LandCruiser
- ๏ปฟ๏ปฟToyota Hilux
- ๏ปฟ๏ปฟFord Ranger
- ๏ปฟ๏ปฟIsuzu D-MAX
- ๏ปฟ๏ปฟMitsubishi Triton
- ๏ปฟ๏ปฟMazda BT-50
- ๏ปฟ๏ปฟJeep Wrangler
- ๏ปฟ๏ปฟSuzuki Jimny and many more!
STANDARD LENGTHS & CUSTOM SIZES
STANDARD LENGTHS & CUSTOM SIZES
Standard lengths are 21 or 24cm. Need 18cm? See our Cargo Drawer Handle. Anything else, order from our Custom Length page.
Factory vs paracord
Swap the plastic for something you'll grab
Same pillar, same screw spots. The hard grey moulding comes off, a hand braided cobra weave goes on.
- โ 32โ35mm thick grip
- โ Fits screw mounts
- โ Handmade Brisbane
Will it fit?
Bolts into your existing screw holes
Unscrew the factory plastic handle, then fit the grip in the same screw mounted spot.
- 01Measure
Hole to hole on your old handle.
- 02Check screws
Screw mounted spots are a fit.
- 03Pick length
Match your measured screw spacing.
Custom sizes available, braided to order.
Honest strength
Built for every grab, pull and climb
A thick, hand braided cord that fills your fist, made for getting in and out of your 4WD, ute or camper every day.
Made for
Not a recovery point
Grab it, pull on it, lean on it. Just never tow or lift with it.
Krawlergrips ยท All Black
The gift he'll use every day
Every climb into the cab, their hand lands on it. Hand braided paracord that swaps in where the factory plastic handle sits, in a 4WD, ute or camper.
Gift hint
Sneak a look at their grab handles. Held in with screws? This grip fits that spot.
Is it worth it?
A grip you touch daily
One grip from
$26.00
Hand braided to order from genuine Type III 550 paracord, made to replace the factory plastic you grab every time you climb in.
550 paracord
Genuine Type III
Replaces plastic
Factory handle out
Made to order
Braided by hand
After you order
Braided, packed, on your doorstep
- 01
Braided to order
Dispatched in 1-4 business days
- 02
Tracked Australia Post
Tracking emailed when it ships
- 03
On your doorstep
Shipped Australia wide
Standard
5-7
business days from shipping
Express
3-6
business days from shipping
- Weekend orders are processed from Tuesday.
- Tracking missing? Check your junk folder.
Krawlergrips ยท Hand braided
Swing in with a proper grip
One grip from $26.00, or kit every handle point with up to 10. Braided by hand, built for every climb in.
Read customer reviews
Free shipping over $180 in Australia
Braided by hand, by me.
The maker, Krawlergrips
No factory line. Every paracord grip is hand braided to order in Brisbane, one cobra weave at a time, then sent off Australia wide.
Optional washer kits
Match the washers to your build
Each grip needs 2 washers and 2 M6 screws. Choose a laser engraved anodised colour to match your build, or choose no washers to reuse your existing hardware.
